Structural Steel Fabrication Cost Per Ton in NC, SC & VA

Structural steel fabrication cost per ton in NC, SC and VA has no fixed price in 2026. It depends on connection count, material grade, coatings, inspection, freight and erection scope. As a national reference, Gordian’s RSMeans data put structural steel at $2,721.31 per ton in October 2026, up 9.85% year over year.

How Much Does Structural Steel Fabrication Cost Per Ton in 2026?

Fabrication and erection, not mill steel, set most of the price per ton. AISC estimates that about 70% of a structural steel package comes from fabrication and erection, and that material is less than one-third of framing cost. A 10% rise in mill prices moves the full package far less than 10%.

AISC’s steel economics data also shows that the structural frame represents around 12% of total project cost. Material prices still matter. Section 232 tariffs on imported steel rose from 25% to 50% on June 4, 2025, and the RSMeans steel price updates from Gordian track how that pressure moves quarter by quarter.

Key Takeaways

  • No universal price: cost per ton changes with each project’s drawings, scope and schedule.
  • Main cost driver: connection count and piece count, not steel weight.
  • Material is the smaller share: fabrication and erection make up about 70% of a steel package.
  • Bid comparison: level every bid to the same scope before comparing per-ton numbers.
  • Accurate pricing: requires drawings, a bill of materials, material grade and a delivery date.

Structural steel fabrication cost per ton is a unit price that divides the cost of a fabricated steel package by its total weight. Depending on the bid, it covers shop work only or adds material, detailing, coatings, freight and erection. Confirm the scope before comparing two per-ton figures.

structural steel fabrication services

What Drives Structural Steel Fabrication Cost in the Southeast?

Five factors drive structural steel fabrication cost in the Southeast: component complexity, material grade, required processes, order volume and delivery distance. In our shop in Dunn, North Carolina, connection count is the biggest cost driver we see. Steel is bought by weight but fabricated by the hour.

  1. Component complexity. Every shear tab, moment connection, cope and stiffener adds cutting, fit-up, welding and inspection time. Two frames with similar tonnage can differ sharply in price.
  2. Material grade. Wide flange shapes are typically ASTM A992, while plate and angle are commonly A36 or A572 Grade 50. The grade must match the structural drawings.
  3. Required processes. CNC processing alone requires fewer shop hours. Adding FCAW structural welding to AWS D1.1 and documented QC inspection raises the per-ton cost.
  4. Volume and repetition. Repeated member sizes spread setup and CNC programming time over more tons. Small orders with many unique pieces carry a higher per-ton price.
  5. Delivery distance. Freight from Dunn stays lower for North Carolina jobsites. Coastal South Carolina and Northern Virginia add haul distance, design loads or delivery restrictions.

Coatings also change the final number, and galvanizing costs more than shop primer. Our guide on how to prevent corrosion on structural steel explains which coating system fits each exposure.

When the building official has not approved a fabricator, IBC Section 1704.2.5 generally requires special inspection of shop work. That inspection is billed to the project and rarely appears in the per-ton bid.

AISC Certification
Comparing bids from certified and non-certified fabricators? Special inspection, rework and schedule delays rarely appear in a per-ton bid.
See how AISC certification changes total project cost →

Service coverage by state: structural steel fabrication in North Carolina, South Carolina and Virginia.

Cost Breakdown by Service: What You’re Actually Paying For

A structural steel shop fabrication price combines four services: CNC processing, FCAW welding, QC inspection, and staging and freight. Each service scales with connection complexity and documentation requirements, not with steel weight alone. Knowing what moves each line helps contractors read a bid correctly.

Shop serviceWhat it includesWhat raises the cost
CNC processingCutting, drilling, coping, layout markingMany unique pieces, copes and hole patterns
Fit-up and FCAW weldingFitting and structural welding per AWS D1.1Moment connections, stiffeners, complete-joint-penetration welds
QC inspectionIn-process and final inspection, weld documentationSpecial inspection, testing and documentation requirements
Staging and freightSequencing, loading, trucking, oversize permitsLong hauls, oversize loads, restricted delivery windows

Structural Steel Cost vs. Competing Materials in 2026

Structural steel, precast concrete and aluminum are priced on different bases, so a per-ton comparison between them misleads. Contractors in the Southeast should compare installed cost per square foot, lead time and site constraints instead. Each material fits a different type of commercial project.

MaterialPricing basisLead time factorsBest fit for B2B projects
Structural steelPer ton, by fabricated scopeShop drawing approvals, material availability, shop loadMultistory frames, long spans, future modifications
Precast concretePer piece, per square foot or per cubic yardCustom molds, casting and curingParking structures, repetitive wall panels, fire-rated assemblies
AluminumPer poundExtrusion availabilityCanopies, railings, light structures in corrosive exposure

We recommend structural steel when a project needs long spans, fast erection or later modifications, because steel members can be fabricated in parallel with site work. The guide on managing lead times in structural steel explains how to protect delivery windows.

CNC processing and fit-up of structural steel members at Richards Welding shop in Dunn, NC

How Should You Compare Structural Steel Bids?

Contractors should compare structural steel bids only after confirming each proposal covers the same scope. A fabrication-only bid and a fabricated-and-erected bid can both be quoted per ton, but they describe different work. A low headline number often excludes material, detailing, coatings or erection.

Bid typePotential inclusionsMain question to ask
Material supplySteel products and agreed handlingAre cutting, drilling and detailing excluded?
Fabrication packageShop processing, fitting and weldingAre material, coatings and delivery included?
Fabricated and deliveredFabrication plus transportationDoes the price include unloading?
Fabricated and erectedShop scope, delivery and field installationAre crane, rigging and field welding included?

We recommend leveling every bid to the same installed scope before comparing price, because headline per-ton numbers rarely describe the same work. A structured subcontractor prequalification process confirms the low bidder can deliver the scope it priced.

Price miscellaneous metals as separate lines. Stairs and railings carry their own code criteria, covered in our guide to IBC code requirements for commercial steel stairs.

What Information Do You Need to Get an Accurate Quote?

An accurate structural steel fabrication quote needs design files, a bill of materials, material grade, quantities and a target delivery date. Richards Welding & Metal Fabrication accepts CAD, DXF, DWG or PDF drawings. Missing information forces estimators to add contingency, which raises the price or adds exclusions.

  1. Send design files in CAD, DXF, DWG or PDF, and state whether they are for pricing, permit or construction.
  2. Include a bill of materials or cut list with quantities.
  3. Confirm the material grade: A992, A36, A572 Grade 50 or as specified.
  4. State finish requirements: bare, shop primer, galvanizing or special coatings.
  5. Define connection-design responsibility and inspection requirements.
  6. Provide the delivery date, jobsite location and erection sequence.

Frequently Asked Questions About Structural Steel Fabrication Cost

How much does structural steel fabrication cost per ton in North Carolina in 2026?

Structural steel fabrication cost per ton in North Carolina has no fixed rate in 2026. It depends on component complexity, material grade, required processes, coatings and delivery. As a national reference, RSMeans data from Gordian placed structural steel at $2,721.31 per ton in October 2026. A project quote requires drawings and scope.

What factors affect structural steel fabrication pricing in the Southeast?

The main cost drivers are component complexity, steel grade (A36 vs A572), required processes (CNC only vs CNC plus welding and QC), order volume and delivery distance. AISC-certified shops can reduce costly rework and compliance failures on commercial projects.

Does AISC certification affect the cost of structural steel fabrication?

AISC certification can affect a fabricator’s bid, but it often lowers total project cost. When the building official has not approved a fabricator, IBC Section 1704.2.5 generally requires special inspection of shop work, billed to the project. Certified shops also reduce rework and inspection delays on commercial projects in NC, SC and VA.

Can I get a structural steel fabrication quote without a full set of drawings?

Yes. Richards Welding reviews preliminary cut lists, bills of materials and sketch-level specifications to provide budget ranges before final drawings are complete. Submit what you have, and our estimating team will respond with a preliminary estimate.

What is the lead time for structural steel fabrication in the Southeast?

Structural steel fabrication lead time depends on order scope, shop drawing approvals, material availability and current shop load. For time-sensitive projects in NC, SC and VA, submit files as early as possible. The Richards Welding estimating team can advise on scheduling from day one.

Fabricated structural steel staged for delivery from Dunn

Request a Structural Steel Fabrication Quote

A cost-per-ton reference supports early planning, but your project needs a price based on its actual drawings, specifications and delivery plan. Richards Welding & Metal Fabrication provides AISC-certified structural steel fabrication services for commercial and industrial projects across North Carolina, South Carolina and Virginia.

Send your drawings, cut list or bill of materials through our contact page, email terry@richardsmetalfabrication.com or call +1 (919) 438-6103.

Sources

  1. Gordian: RSMeans Data, Steel Price Updates (Q4 2026 Structural Steel Cost Index).
  2. The White House: Proclamation “Adjusting Imports of Aluminum and Steel Into the United States” (June 3, 2025).
  3. American Institute of Steel Construction: Steel Economics, material and fabrication share of structural steel package cost.
  4. International Code Council: International Building Code, Section 1704.2.5, Special Inspection of Fabricated Items.

Richards Welding & Metal Fabrication Estimating Team, AISC-certified structural steel fabricator, Dunn, NC · October 27, 2026

Call Us