What Is an AISC Certified Steel Fabricator?

Quick Answer: An AISC certified steel fabricator is a fabrication shop whose quality management system, documented procedures, personnel, and equipment have passed independent audits under the AISC Certification Program and AISC 207. Certification is typically valid for twelve months and can be verified online, so you can confirm it before awarding a steel package.

How to Verify an AISC-Certified Steel Fabricator

The structural specifications call for AISC certified fabrication. Your lowest steel bid came from a shop that isn’t certified, and the engineer of record just rejected the substitution two weeks before shop drawings were due. Now you are rebidding against the erection date. This guide explains what an AISC certified steel fabricator is, which certification programs apply to commercial work, and how to verify a shop before you award the package in North Carolina, South Carolina, or Virginia.

AISC certified steel fabricator

What You Get When You Hire an AISC Certified Steel Fabricator

Quick Answer: Hiring an AISC certified steel fabricator gives you audited proof that the shop controls quality from material receipt to shipping. Unlike a non-certified shop’s sales claim, that proof is verified by independent audits, which simplifies submittal review and protects your erection schedule when specs require certification.

Certification covers the systems behind every piece: documented procedures, qualified personnel, calibrated equipment, material traceability, and a process for nonconformances. AISC started its certification program in 1976, and audits are performed by an independent audit agency, Quality Management Company. Richards Welding & Metal Fabrication is AISC certified; see how our AISC certified facility in Dunn, NC operates, or compare AISC certified vs non-certified fabricators.

AISC Certification Programs and Categories Explained

Quick Answer: AISC certification is issued by program, not as a single generic seal. Building fabricators hold BU, bridge fabricators hold SBR, IBR, or ABR, and erectors hold CSE. Matching the program named in your specifications to the AISC directory listing prevents rejected submittals and rebids.

Certified Building Fabricator (BU)

BU is the program for shops that fabricate structural steel frames for buildings. AISC applies it regardless of project size and complexity. For most commercial and industrial buildings in the Southeast, BU is the program an engineer of record specifies, usually in the Division 05 structural steel section.

Certified Bridge Fabricator (SBR, IBR, ABR)

Bridge certification has three levels: Simple for unspliced rolled sections, Intermediate for typical bridges, and Advanced for complex structures. Building certification does not include bridge work, so DOT and bridge packages require checking this program separately.

Hydraulic, Highway Component, and Erector Programs

AISC also certifies hydraulic fabricators (HYD, HYDA), highway component manufacturers (CPT), and erectors (CSE). Endorsements such as Fracture Control (FCE) and Complex Coatings (CCE) add requirements. An AISC certified steel fabricator may hold one program or several, so read the full listing.

Stairs, Railings, and Secondary Steel

AISC has no separate category for stairs, railings, or miscellaneous metals. An AISC certified steel fabricator usually builds these scopes under its building program, and inspectors check them against the IBC. Richards Welding fabricates prefabricated steel stairs, railings, and miscellaneous metals for commercial railing projects in North Carolina and Virginia; see our IBC requirements for commercial stairs and railings.

AISC Certification Programs at a Glance

ProgramCodeTypical scopeWhen to check it
Building FabricatorBUStructural frames for buildingsCommercial, industrial, multifamily
Bridge FabricatorSBR, IBR, ABRHighway and railroad bridgesDOT and bridge packages
Hydraulic FabricatorHYD, HYDAHydraulic metal structuresWater and civil infrastructure
Highway Component ManufacturerCPTBridge and highway componentsHighway packages
ErectorCSEField erection quality systemWhen specs require a certified erector

Source: AISC Certification program descriptions and FAQs, 2026.

AISC CERTIFICATION

Not sure which certification your specs require?

Send the structural specifications to our estimating team and we will confirm the requirements before you price the package.

Talk to Our Estimating Team →

Matching AISC Certification to Your Project Specifications

Quick Answer: The right AISC certified steel fabricator holds the program and capabilities your scope requires: BU for building frames, the correct AWS code for stainless or aluminum, and CNC processing for complex assemblies. Checking that fit before award avoids rebids and protects float in the erection schedule.

Heavy Structural Frames and Carbon Steel

For framing in ASTM A992 or A572 Grade 50, confirm the AISC certified steel fabricator holds BU, uses AWS D1.1 welding procedures, and meets the special inspection requirements of IBC Chapter 17. In our shop, structural welding is FCAW under AWS-compliant, documented procedures. Budget the scope early with our structural steel cost per ton in NC, SC and VA.

Stainless and Aluminum Components

Stainless and aluminum scopes need their own review: AWS D1.6 governs stainless welding and AWS D1.2 governs aluminum. For aluminum scopes, Richards Aluminum operates from the same Dunn, NC address. Review its aluminum railing systems for commercial projects and its guide on how to choose the right aluminum fabrication shop.

Complex Assemblies and CNC Processing

Connection plates and built-up assemblies depend on accurate cutting and drilling. Ask how the AISC certified steel fabricator programs CNC cutting, burning, and drilling, and how it checks fit-up before welding. Review our CNC cutting, press brake forming, and AWS-compliant structural welding capabilities.

What to Require by Scope

ScopeAISC programWelding standardOther references
Building framesBUAWS D1.1AISC 360, AISC 303, IBC Ch. 17
Stairs and railingsBU (typical)AWS D1.1IBC and local amendments
Stainless componentsNot AISC-specificAWS D1.6ASTM A240
Aluminum systemsNot AISC-specificAWS D1.2Aluminum Association
AISC certified steel fabricator shop NC

Quality Control and Certified Welding Under AISC Audits

Quick Answer: AISC audits confirm that a fabricator’s quality control is documented and actually followed. The shop must show inspection records, welding procedure controls, calibration, and corrective action. Those are the same records your special inspector requests at submittal and in the field, so certification simplifies inspection review.

What the Audit Reviews

An AISC certified steel fabricator is audited on these five areas:

  • Quality management system and documented procedures.
  • Welding procedure specifications and welder qualification records.
  • Material traceability through mill test reports.
  • Calibration of inspection and measuring equipment.
  • Nonconformance and corrective action records.

How to Verify a Fabricator’s AISC Certification

Search the AISC certified company directory by company name or state, then confirm the program code, endorsements, and expiration date. Certification is typically valid for twelve months, so an old certificate copy does not prove a shop is an AISC certified steel fabricator today. For the full vetting process, use our steel fabrication subcontractor prequalification checklist.

Working with an AISC Certified Steel Fabricator in NC, SC, and VA

Working with an AISC certified steel fabricator based in the region shortens delivery distances and keeps one point of contact from file review to staged delivery. For projects in North Carolina, South Carolina, and Virginia, that means faster RFI answers and deliveries sequenced to your erection plan.

From Dunn, NC, Richards Welding serves commercial projects across three states, with dedicated pages for North Carolina structural steel projects, South Carolina fabrication and delivery, and Virginia commercial steel packages. For schedule planning, read structural steel fabrication lead times in 2026, or see completed steel stairs and railings.

AISC certified fabrication facility Dunn NC

Common Questions About AISC-Certified Steel Fabricators

What does AISC certified mean for a steel fabricator?

It means the shop passed independent audits of its quality management system, documented procedures, personnel, and equipment under AISC 207. It is the main quality benchmark specifiers use for structural steel fabrication in U.S. commercial construction.

How long does AISC certification last?

AISC certification is typically valid for twelve months. Certified participants are audited to keep it, so always confirm the current expiration date in the AISC directory before awarding a contract.

How do I check if a steel fabricator is AISC certified?

Search the AISC certified company directory at aisc.org by company name or state. Check the program code, such as BU for buildings, any endorsements, and the expiration date.

What is the difference between AISC certification and AWS certification?

AISC certifies the fabrication facility and its quality system. AWS standards govern welding procedures and welder qualifications. A certified structural shop needs both: an audited quality system and AWS-compliant welding.

Is AISC certification required for structural steel in North Carolina?

Not on every project. It is required when the specifications or the engineer of record call for it. Under IBC Section 1704.2.5, work by a fabricator that is not approved may require special inspection of fabricated items.

Structural steel fabrication for projects in NC, SC and VA


Conclusion

An AISC certified steel fabricator gives you audited proof of quality control, a program code you can match to your specs, and records your inspector will accept. Verify the listing, confirm the program, and send your drawings to our estimating team or call (919) 438-6103 for a scope-complete quote.

AISC CERTIFIED FABRICATOR

Richards Welding is AISC certified.

Verify our listing in the AISC directory, then send your drawings, cut list, and target date. Our estimating team responds immediately, or call (919) 438-6103.

Submit Your Project Files →

Prefer to talk first? Call (919) 438-6103, email terry@richardsmetalfabrication.com, or visit our shop at 109 East Devine St., Dunn, NC 28334.

Written by: Richards Welding Team · Steel Fabrication Experts
Last updated: October 22, 2026

Sources

  1. AISC Certification, Certification Categories: aisc.org
  2. AISC Certification, Frequently Asked Questions: aisc.org
  3. AISC 207-23, Standard for Certification Programs: aisc.org
  4. AISC Certified Company Search: aisc.org
  5. AWS D1.1/D1.1M (Steel), D1.2/D1.2M (Aluminum) and D1.6/D1.6M (Stainless Steel), American Welding Society
  6. International Building Code, Chapter 17, Section 1704.2.5, International Code Council
Call Us