A commercial railing fabricator in North Carolina must build guards and handrails to the NC State Building Code and the 2010 ADA Standards. That means a 42 in minimum guard height, a 34 to 38 in handrail height, and a 200 lb top-rail load. Richards Welding fabricates, inspects, and ships each package from its AISC certified shop in Dunn, NC.
The building inspector just failed your stair guards because the picket spacing drifted past 4 in on two flights. Now the crew is cutting and rewelding on site while the certificate of occupancy waits.
Richards Welding & Metal Fabrication is a commercial railing fabricator in North Carolina for general contractors, architects, and multifamily developers who need railings built to the approved drawings the first time.


Frequently Asked Questions
Direct answers on codes, materials, delivery, and estimating for contractors comparing a commercial railing fabricator in North Carolina.
Are your commercial railings fabricated in North Carolina?
Yes. Richards Welding is an AISC certified commercial railing fabricator in North Carolina, located in Dunn. CNC processing, AWS-compliant FCAW welding, and QC inspection happen under one roof. Each package ships in installation sequence, so crews set railings floor by floor instead of sorting loose pieces.
What is the minimum guard height for commercial railings in North Carolina?
Commercial guards in North Carolina must be at least 42 in high under IBC Section 1015.3, as adopted in the NC State Building Code. Guards must also resist a 200 lb concentrated load at the top rail and stop a 4 in sphere up to 36 in high. See our guide to IBC requirements for commercial stairs and railings.
Not sure your railing drawings will pass inspection?
Our estimating team reviews guard heights, picket spacing, and connections before fabrication starts.
What height do ADA handrails need on commercial stairs?
ADA handrails must sit between 34 and 38 in above stair nosings and ramp surfaces, per Section 505.4 of the 2010 ADA Standards. They also need continuous gripping surfaces and extensions at the top and bottom of each flight.
Should commercial railings be steel or aluminum?
Steel railings fit interior stair towers, industrial egress, and heavy-use platforms where stiffness leads the spec. See our custom commercial steel railings guide. Aluminum railings suit exterior balconies and coastal projects, where low weight and corrosion resistance matter most.
Richards Aluminum explains how to choose a commercial aluminum railing and which aluminum railing shop drawings you need before quoting.
How do shop-fabricated railings prevent delays on job sites?
Shop-fabricated railings arrive pre-cut, welded, and finished to the approved shop drawings, so field crews skip cutting and touch-up work. That is how a commercial railing fabricator in North Carolina keeps railing scope off the critical path. See completed steel stairs and railings in our gallery.
Why does AISC certification matter when choosing a railing fabricator?
AISC certification requires an independent audit of the fabricator’s facility, personnel, and quality management system. Combined with AWS-compliant FCAW welding and documented weld procedures, it gives engineers and building officials a clear paper trail. Learn more about our AISC certified facility in Dunn, NC.
What do I need to send a commercial railing fabricator in North Carolina for a quote?
Send the following:
- CAD, DXF, DWG, or PDF drawings
- A cut list or bill of materials
- Material specs, including grade and finish
- The quantity and your target delivery date
A complete package lets a commercial railing fabricator in North Carolina return an accurate, scope-complete number faster.
Not sure your railing drawings will pass inspection?
Our estimating team reviews guard heights, picket spacing, and connections before fabrication starts.
Sources and Technical Review
Reviewed by: Richards Welding Estimating and Quality Control Team, AISC certified fabrication shop in Dunn, NC.
Last updated: October 16, 2026
American Institute of Steel Construction, AISC Certification: aisc.org
International Code Council, International Building Code, Sections 1014, 1015 and 1607: codes.iccsafe.org
U.S. Department of Justice, 2010 ADA Standards for Accessible Design, Section 505: ada.gov
North Carolina Office of State Fire Marshal, NC State Building Codes: ncosfm.gov